World's Best Universal Oil Filter Wrench

Anybody who has worked on a engine knows that they need a oil filter wrench if they want to remove the oil filter off of the engine. I am sure we have all seen those standard oil filter wrenches where you slip them onto the oil filter and pull that lever which tightens it against the filter.

Thats all well and great if your oil wrench is the proper sise for the filter you are trying to remove cause if its not, your out of luck there buddy. I have one of those big rig style oil wrenches and its too big to fit onto 2 inch oil filters and because of that lever, you can't get them up into tight spaces to work them.

So I went looking for an oil filter wrench which would work great for small filters, hence, small engine work. Thats when I found the 3-Jaw universal wrench being sold at Amazon.com. I was a bit worried when I bought this because I saw how small it was in the Amazon image, thought it might not be strong enough.

Oh how I was wrong, first thing I noticed when I took it out of the box was how heavy it was, deffinetly meant for the most tightest of filters. There was a guy at Amazon who said that he went to a hardware outlet to purchase a adaptor because he did not have a 1/2 drive rachet. Oh how I feel bad for him, he waisted his time, essentally he bought an adaptor to adapt from the adaptor.

Hence it came with an adaptor and so if he just pulled the adaptor out, he would have noticed it has a built in 3/8 drive for rachets as well. Oops :(


The jaw is fully adjustable from 2 and 1/2 inches all the way up to 4 inches so thats why its universal. All you have to do is put the jaws onto an oil filter, attach your rachet/socket wrench and begin loosening the filter.

The only thing I don't like about this design is that you must keep holding it, if you let off pressure even for a second, the jaws will slip off the filter. Its not bad however once you get used to it and it works well. You tighten on the filter the same way, just switch your rachet direction switch.

I would have liked to have seen rubber going down the 3 jaws as to protect the filter from getting scratched. If your not worried about cosmetics, then this won't matter to you. But if you have a race car for car shows, you may not want to scratch up your oil filter using this wrench which has no rubber on the jaws.

However, this wrench design has a huge advantage over standard filter wrenches in that you hook onto it from the middle of the wrench. What this means is, you have a hard to reach oil filter in that Honda? No problem, stick on a few extensions, then your rachet, stick it up there and wala, instant access!

All in all I think this is a great oil filter wrench. But it would have been nice to have a lock mechanism on the wrench to keep it from slipping off the filter if you let off pressure. And it would have been nice to have had rubber going up and down the jaws as to keep the filters from getting scratched.

Date Purchased: 11/07-08
Price Paid: $8.00
Recommend: YES

Spray the gears with WD 40 and go to work. On most filters you get enough leverage to remove and replace without even needing to use a wrench handel, just turn by hand.

I purchased this based on the design concept, and reviews I read on Amazon. Here's the problem, the jaws WILL NOT GRIP in a tight space. I needed to access an oil filter in a tight location. Because I couldn't get both hands on the filter, I was unable to get the tool to bite into the filter (I really worked at this). If one had the room, you could possibly hold the wench with your free hand to keep it from spinning until the jaws actually gripped into the filter. If I had that much room, I wouldn't need a special tool.